Home  >  Products  >  Murata  >  Inductors  >  Wire Wound Ferrite Inductor for Power Lines  >  LQH32PN4R7NN0L
Ceramic chip capacitors
  GRM Series Capacitors
  GNM Series Capacitors
Crystal Oscillators
  XNCHH Series
  XNCJH Series
Chip Ferrite Beads
  BLM Series
  Wire Wound Ferrite Inductor for Power Lines
  Multilayer type inductor for General Circuits
  Multilayer type RF Inductor
  Common Mode Noise Filters
  Impedance Type Filters
  EMI Suppression Filters
Tantalum Capacitors
  TAJ Series Capacitors
  TPS Series Capacitors
When rated current is applied to the products, inductance will be within ±30% of nominal inductance value.
When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max.
Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.

L size 3.2 ±0.3mm
W size 2.5 ±0.2mm
T size 1.55 ±0.15mm
External terminal width e 1210 (3225)
Inductance 4.7µH ±30%
Inductance test frequency 1MHz
Rated current (Isat) (Based on Inductance change) 1000mA
Rated current (Itemp) (Based on Temperature rise) 1000mA
Max. of DC resistance 0.216Ω
Avg. of DC resistance 0.18Ω±20%
Self resonance frequency (min.) 40MHz
Operating temperature range (Self-temperature rise is included) -40~125℃
Operating temperature range (Self-temperature rise is not included) -40~85℃
Class of magnetic shield Magnetic Resin
Series LQH32PN_N0
Packaging Specifications Minimum quantity
L φ180mm Embossed taping 2000
K φ330mm Embossed taping 7500
Mass (typ.)
1 piece 0.044g
Back To List
Tel:86-755-8282 3580
Address: 1st Floor,Building 31,Yuanshan Industrial Park B,shangcun,Gongming,Guangming District,shenzhen
86-755-8282 3580
Counseling hotline
Online service
Shenzhen Sanmega Electronics CO.,LTD All Rights Reserved. 
Copyright @ 2017
Home   |   About us   |   Products   |   Solution   |   Service&Support   |   News   |   Contact us   |   Sitemap
jack 点击这里给我发消息
Linda 点击这里给我发消息
phiona 点击这里给我发消息
Donald 点击这里给我发消息